一、设备介绍   本净化器是一款专为工业废气专业处理车间因生产产生的烟尘及轻质颗粒而设计的一体化净化装置。设备核心部件主要采用活性炭吸附净化装置和静电吸附,既能有效去除废气中的有害物质和污染颗粒等,又能降解各种异味和各种含金属加工厂生产出的有毒有害气体。二、工作原理   设备有进气口和出气口两端。需生产废气经进气口进入中效过滤网板内,烟尘废气中的部分烟尘或颗粒先有过滤网板过滤拦截,而后烟尘废气进入板框式一级蜂窝活性炭过滤器进行初效过滤及吸附。此时,大部分的大颗粒较重的粉尘被过滤至板框过滤器表面,其他含有细微颗粒的异味型气体从板框过滤器的内表面经活性炭层层过滤后由另一外表面排出,汇合后进入板框式二级蜂窝活性炭过滤器进行高效过滤、吸附及深度净化。此时,大部分的微小颗粒及粉尘被过滤至板框过滤器表面,未处理完的异味性气体从板框过滤器的内表面经活性炭层层过滤后由另一外表面排出至出风口。板框式活性炭过滤器采用二级串联处理方式,有效的扩大了废气同活性炭接触面积的同时很大程度的提高了废气吸附及净化效果,再由高压静电吸附进行处理。设备内部的初效过滤网板固定在设备的进风口位置,板框过滤器采用抽屉式设计,同时设有检修门,打开可清理、清洗或更换板框过滤器。板框过滤器安装在特制的框架上,由若干活性炭蜂窝海绵组成一个过滤单元,形成多级净化单元,再由若干单元拼装成化学过滤段。板框过滤器的金属壳体采用金属材质,可以重复使用,这种设计大大降低了用户的运行费用。三、应用范围  广泛应用于化工、电子、金属加工、烟草、玻璃、制药、食品加工、净化室等因生产产生的废气或不锈钢及管道加工、铝等金属焊接时产生的含铅、锡等烟气、废气或粉尘或烟雾处理场所。1. Introduction of equipmentThe purifier is an integrated purification device specially designed for industrial waste gas to deal with smoke and light particles produced in workshop. The core components of the equipment are mainly activated carbon adsorption purification device and electrostatic adsorption, which can effectively remove the harmful substances and pollution particles in the waste gas, and can also degrade various odor and all kinds of toxic and harmful gases produced by various metal processing plants.Two. The principle of workThe equipment has air intake and air outlet ends. The exhaust gas is required to enter the medium effect filter plate through the intake air inlet, and some of the dust or particles in the smoke and dust exhaust are first filtered and intercepted, and the smoke and dust gas enters the first stage honeycomb activated carbon filter of the plate frame to carry out the initial filtration and adsorption. At this time, most of the heavier particles are filtered to the surface of the plate frame filter, and the other odor gas containing fine particles is filtered from the outer surface of the inner surface of the plate frame filter through the activated carbon layer and then into the plate frame type two stage honeycomb activated carbon filter for efficient filtration, adsorption and depth. Purify. At this time, most of the tiny particles and dust are filtered to the surface of the plate frame filter, and the untreated odor gas is filtered from the other surface to the outlet from the outer surface of the inner surface of the plate frame filter. The plate frame type activated carbon filter has two stages in series treatment, which effectively expands the contact area of the exhaust gas to the activated carbon, and greatly improves the effect of the adsorption and purification of the exhaust gas, and then the high voltage electrostatic adsorption is used to deal with it.The initial filtering net plate inside the equipment is fixed in the air inlet position of the equipment. The plate frame filter adopts the drawer style design, and the repair door is set up at the same time, and the plate frame filter can be cleaned, cleaned or replaced. The plate frame filter is installed on the special frame, which consists of a number of activated carbon honeycomb sponges to form a filter unit, forming a multi-level purification unit, and then assembled into a chemical filter section by a number of units. The metal shell of the frame filter is made of metal material and can be reused. This design greatly reduces the operation cost of the user.Three. Application scopeIt is widely used in chemical, electronic, metal processing, tobacco, glass, pharmaceutical, food processing, purification room and other products produced by the production of exhaust gas or stainless steel and pipe processing, aluminum and other metal welding of lead, tin and other flue gas, waste gas or dust or smoke treatment places.

一、设备介绍   本净化器是一款专为工业废气专业处理车间因生产产生的烟尘及轻质颗粒而设计的一体化净化装置。设备核心部件主要采用活性炭吸附净化装置和静电吸附,既能有效去除废气中的有害物质和污染颗粒等,又能降解各种异味和各种含金属加工厂生产出的有毒有害气体。二、工作原理   设备有进气口和出气口两端。需生产废气经进气口进入中效过滤网板内,烟尘废气中的部分烟尘或颗粒先有过滤网板过滤拦截,而后烟尘废气进入板框式一级蜂窝活性炭过滤器进行初效过滤及吸附。此时,大部分的大颗粒较重的粉尘被过滤至板框过滤器表面,其他含有细微颗粒的异味型气体从板框过滤器的内表面经活性炭层层过滤后由另一外表面排出,汇合后进入板框式二级蜂窝活性炭过滤器进行高效过滤、吸附及深度净化。此时,大部分的微小颗粒及粉尘被过滤至板框过滤器表面,未处理完的异味性气体从板框过滤器的内表面经活性炭层层过滤后由另一外表面排出至出风口。板框式活性炭过滤器采用二级串联处理方式,有效的扩大了废气同活性炭接触面积的同时很大程度的提高了废气吸附及净化效果,再由高压静电吸附进行处理。设备内部的初效过滤网板固定在设备的进风口位置,板框过滤器采用抽屉式设计,同时设有检修门,打开可清理、清洗或更换板框过滤器。板框过滤器安装在特制的框架上,由若干活性炭蜂窝海绵组成一个过滤单元,形成多级净化单元,再由若干单元拼装成化学过滤段。板框过滤器的金属壳体采用金属材质,可以重复使用,这种设计大大降低了用户的运行费用。三、应用范围  广泛应用于化工、电子、金属加工、烟草、玻璃、制药、食品加工、净化室等因生产产生的废气或不锈钢及管道加工、铝等金属焊接时产生的含铅、锡等烟气、废气或粉尘或烟雾处理场所。1. Introduction of equipmentThe purifier is an integrated purification device specially designed for industrial waste gas to deal with smoke and light particles produced in workshop. The core components of the equipment are mainly activated carbon adsorption purification device and electrostatic adsorption, which can effectively remove the harmful substances and pollution particles in the waste gas, and can also degrade various odor and all kinds of toxic and harmful gases produced by various metal processing plants.Two. The principle of workThe equipment has air intake and air outlet ends. The exhaust gas is required to enter the medium effect filter plate through the intake air inlet, and some of the dust or particles in the smoke and dust exhaust are first filtered and intercepted, and the smoke and dust gas enters the first stage honeycomb activated carbon filter of the plate frame to carry out the initial filtration and adsorption. At this time, most of the heavier particles are filtered to the surface of the plate frame filter, and the other odor gas containing fine particles is filtered from the outer surface of the inner surface of the plate frame filter through the activated carbon layer and then into the plate frame type two stage honeycomb activated carbon filter for efficient filtration, adsorption and depth. Purify. At this time, most of the tiny particles and dust are filtered to the surface of the plate frame filter, and the untreated odor gas is filtered from the other surface to the outlet from the outer surface of the inner surface of the plate frame filter. The plate frame type activated carbon filter has two stages in series treatment, which effectively expands the contact area of the exhaust gas to the activated carbon, and greatly improves the effect of the adsorption and purification of the exhaust gas, and then the high voltage electrostatic adsorption is used to deal with it.The initial filtering net plate inside the equipment is fixed in the air inlet position of the equipment. The plate frame filter adopts the drawer style design, and the repair door is set up at the same time, and the plate frame filter can be cleaned, cleaned or replaced. The plate frame filter is installed on the special frame, which consists of a number of activated carbon honeycomb sponges to form a filter unit, forming a multi-level purification unit, and then assembled into a chemical filter section by a number of units. The metal shell of the frame filter is made of metal material and can be reused. This design greatly reduces the operation cost of the user.Three. Application scopeIt is widely used in chemical, electronic, metal processing, tobacco, glass, pharmaceutical, food processing, purification room and other products produced by the production of exhaust gas or stainless steel and pipe processing, aluminum and other metal welding of lead, tin and other flue gas, waste gas or dust or smoke treatment places.

一、设备介绍   本净化器是一款专为工业废气专业处理车间因生产产生的烟尘及轻质颗粒而设计的一体化净化装置。设备核心部件主要采用活性炭吸附净化装置和静电吸附,既能有效去除废气中的有害物质和污染颗粒等,又能降解各种异味和各种含金属加工厂生产出的有毒有害气体。二、工作原理   设备有进气口和出气口两端。需生产废气经进气口进入中效过滤网板内,烟尘废气中的部分烟尘或颗粒先有过滤网板过滤拦截,而后烟尘废气进入板框式一级蜂窝活性炭过滤器进行初效过滤及吸附。此时,大部分的大颗粒较重的粉尘被过滤至板框过滤器表面,其他含有细微颗粒的异味型气体从板框过滤器的内表面经活性炭层层过滤后由另一外表面排出,汇合后进入板框式二级蜂窝活性炭过滤器进行高效过滤、吸附及深度净化。此时,大部分的微小颗粒及粉尘被过滤至板框过滤器表面,未处理完的异味性气体从板框过滤器的内表面经活性炭层层过滤后由另一外表面排出至出风口。板框式活性炭过滤器采用二级串联处理方式,有效的扩大了废气同活性炭接触面积的同时很大程度的提高了废气吸附及净化效果,再由高压静电吸附进行处理。设备内部的初效过滤网板固定在设备的进风口位置,板框过滤器采用抽屉式设计,同时设有检修门,打开可清理、清洗或更换板框过滤器。板框过滤器安装在特制的框架上,由若干活性炭蜂窝海绵组成一个过滤单元,形成多级净化单元,再由若干单元拼装成化学过滤段。板框过滤器的金属壳体采用金属材质,可以重复使用,这种设计大大降低了用户的运行费用。三、应用范围  广泛应用于化工、电子、金属加工、烟草、玻璃、制药、食品加工、净化室等因生产产生的废气或不锈钢及管道加工、铝等金属焊接时产生的含铅、锡等烟气、废气或粉尘或烟雾处理场所。1. Introduction of equipmentThe purifier is an integrated purification device specially designed for industrial waste gas to deal with smoke and light particles produced in workshop. The core components of the equipment are mainly activated carbon adsorption purification device and electrostatic adsorption, which can effectively remove the harmful substances and pollution particles in the waste gas, and can also degrade various odor and all kinds of toxic and harmful gases produced by various metal processing plants.Two. The principle of workThe equipment has air intake and air outlet ends. The exhaust gas is required to enter the medium effect filter plate through the intake air inlet, and some of the dust or particles in the smoke and dust exhaust are first filtered and intercepted, and the smoke and dust gas enters the first stage honeycomb activated carbon filter of the plate frame to carry out the initial filtration and adsorption. At this time, most of the heavier particles are filtered to the surface of the plate frame filter, and the other odor gas containing fine particles is filtered from the outer surface of the inner surface of the plate frame filter through the activated carbon layer and then into the plate frame type two stage honeycomb activated carbon filter for efficient filtration, adsorption and depth. Purify. At this time, most of the tiny particles and dust are filtered to the surface of the plate frame filter, and the untreated odor gas is filtered from the other surface to the outlet from the outer surface of the inner surface of the plate frame filter. The plate frame type activated carbon filter has two stages in series treatment, which effectively expands the contact area of the exhaust gas to the activated carbon, and greatly improves the effect of the adsorption and purification of the exhaust gas, and then the high voltage electrostatic adsorption is used to deal with it.The initial filtering net plate inside the equipment is fixed in the air inlet position of the equipment. The plate frame filter adopts the drawer style design, and the repair door is set up at the same time, and the plate frame filter can be cleaned, cleaned or replaced. The plate frame filter is installed on the special frame, which consists of a number of activated carbon honeycomb sponges to form a filter unit, forming a multi-level purification unit, and then assembled into a chemical filter section by a number of units. The metal shell of the frame filter is made of metal material and can be reused. This design greatly reduces the operation cost of the user.Three. Application scopeIt is widely used in chemical, electronic, metal processing, tobacco, glass, pharmaceutical, food processing, purification room and other products produced by the production of exhaust gas or stainless steel and pipe processing, aluminum and other metal welding of lead, tin and other flue gas, waste gas or dust or smoke treatment places.

一、设备介绍   本净化器是一款专为工业废气专业处理车间因生产产生的烟尘及轻质颗粒而设计的一体化净化装置。设备核心部件主要采用光氧装置或水湿式,既能有效去除废气中的有害物质和污染颗粒等,又能降解各种异味和各种含金属加工厂生产出的有毒有害气体。二、工作原理   废气在引风机的负压作用下先进入光氧装置,光氧主要利用特制的高能高臭氧UV紫外线光束照射废气,裂解工业废气如:氨、三甲胺、硫化氢、甲硫氢、甲硫醇、甲硫醚、乙酸丁酯、乙酸乙酯、二甲二硫、二硫化 碳和苯乙烯、硫化物H2S,VOC类、苯、甲苯、二甲苯的分子链结构,使有机或无机高分子恶臭化合物的分子链在高能紫外线的光束的照射下降解转变成低分子 化合物,利用高能高臭氧UV紫外线光束分解空气中的氧分子及水分子产生游离氧(活性氧)和OH自由基,因游离氧和所携正负电子不平衡所以需与氧分子结合,进而产生臭氧。众所周知臭氧对有机物具有极强的氧化作用,对工业废气及其它刺激性异味有立竿见影的清除效果。进入高效填料塔。在填料塔的上端,喷头喷出吸收液均匀分布在填料上,废气与吸收液在填料表面上充分接触,发生反应。废气中的易溶于水的HCL、NO2、NH3等酸性物质几乎全被溶解在吸收液里,并与吸收液反应,生成无害的盐类和水,从而达到净化废气的目的。净化后的气体会饱含水份,经过塔顶的除雾装置去除水份后直接排放到大气中。吸收液根据污染物性质配制,可循环使用。三、应用范围  广泛应用于化工、电子、金属加工、烟草、玻璃、制药、食品加工、净化室等因生产产生的废气或不锈钢及管道加工、铝等金属焊接时产生的含铅、锡等烟气、废气或粉尘或烟雾处理场所。One、Equipment introductionThe purifier is an integrated purification device specially designed for industrial waste gas to deal with smoke and light particles produced in workshop. The core components of the equipment are mainly using the light oxygen device or water wet type, which can effectively remove the harmful substances and pollution particles in the waste gas, but also can degrade various odor and all kinds of toxic and harmful gases produced by various metal processing plants.Two、Working principleThe exhaust gas is first entered into the oxygen device under the negative pressure of the fan. The light oxygen is mainly irradiated by the special high-energy and high ozone UV ultraviolet light beam. The pyrolysis industrial waste gases such as ammonia, trimethylamine, hydrogen sulfide, methyl thiohydrin, methionyl alcohol, methionine, butyl acetate, ethyl acetate, two a, two sulfur, carbon disulfide and styrene are used. The molecular chain structure of sulfides H2S, VOC, benzene, toluene and xylene makes the molecular chain of organic or inorganic polymer odour compounds decompose into low molecular compounds under the irradiation of high energy ultraviolet light, and uses high energy high ozone UV ultraviolet light to decompose oxygen molecules and water molecules in the air to produce free oxygen (activity). Oxygen and OH radicals, due to the imbalance of free oxygen and positive and negative electrons, need to combine with oxygen molecules to produce ozone. As we all know, ozone has a strong oxidation effect on organic compounds, and has instant effect on industrial waste gas and other irritating odors. Enter the high efficient packing tower. At the upper end of the packed column, the nozzle sprays out the absorption liquid evenly distributed on the packing, and the exhaust gas and the absorption liquid are fully contacted on the surface of the packing, and react. The acidic substances, such as HCL, NO2 and NH3, which are soluble in water, are almost completely dissolved in the absorption liquid and react with the absorption liquid to produce harmless salt and water, thus the purpose of purifying the waste gas is achieved. The purified gas will be full of moisture and will be discharged into the atmosphere directly after removing the moisture from the mist eliminator at the top of the tower. The absorption liquid is prepared according to the nature of pollutants and can be recycled.Three、The scope of applicationIt is widely used in chemical, electronic, metal processing, tobacco, glass, pharmaceutical, food processing, purification room and other products produced by the production of exhaust gas or stainless steel and pipe processing, aluminum and other metal welding of lead, tin and other flue gas, waste gas or dust or smoke treatment places.

一、设备介绍   本净化器是一款专为工业废气专业处理车间因生产产生的烟尘及轻质颗粒而设计的一体化净化装置。设备核心部件主要采用活性炭吸附净化装置和静电吸附,既能有效去除废气中的有害物质和污染颗粒等,又能降解各种异味和各种含金属加工厂生产出的有毒有害气体。二、工作原理   设备有进气口和出气口两端。需生产废气经进气口进入中效过滤网板内,烟尘废气中的部分烟尘或颗粒先有过滤网板过滤拦截,而后烟尘废气进入板框式一级蜂窝活性炭过滤器进行初效过滤及吸附。此时,大部分的大颗粒较重的粉尘被过滤至板框过滤器表面,其他含有细微颗粒的异味型气体从板框过滤器的内表面经活性炭层层过滤后由另一外表面排出,汇合后进入板框式二级蜂窝活性炭过滤器进行高效过滤、吸附及深度净化。此时,大部分的微小颗粒及粉尘被过滤至板框过滤器表面,未处理完的异味性气体从板框过滤器的内表面经活性炭层层过滤后由另一外表面排出至出风口。板框式活性炭过滤器采用二级串联处理方式,有效的扩大了废气同活性炭接触面积的同时很大程度的提高了废气吸附及净化效果,再由高压静电吸附进行处理。设备内部的初效过滤网板固定在设备的进风口位置,板框过滤器采用抽屉式设计,同时设有检修门,打开可清理、清洗或更换板框过滤器。板框过滤器安装在特制的框架上,由若干活性炭蜂窝海绵组成一个过滤单元,形成多级净化单元,再由若干单元拼装成化学过滤段。板框过滤器的金属壳体采用金属材质,可以重复使用,这种设计大大降低了用户的运行费用。三、应用范围  广泛应用于化工、电子、金属加工、烟草、玻璃、制药、食品加工、净化室等因生产产生的废气或不锈钢及管道加工、铝等金属焊接时产生的含铅、锡等烟气、废气或粉尘或烟雾处理场所。One、Equipment introductionThe purifier is a specially designed for the professional integration of industrial waste gasprocessing workshop because of dust generated in the production and design of light particles andpurifying device. The core components of equipment mainly uses active carbon purifying deviceand electrostatic adsorption, which can effectively remove harmful substances in exhaust gas andparticulate pollution, but also can degrade various peculiar smell and poisonous and harmful gascontaining various metal processing plant to produce.Two、Working principleThe device has an air inlet and an air outlet ends. Production exhaust gas by the effect of filter screen of the inlet into the inner part of the dust, the dust and waste gas or particle to filter screen filtering to intercept, and then the dust and waste gas into the early effect of filtration and adsorption of plate and frame type level honeycomb activated carbon filter. At this time, most of thebig dust particles heavier by filtering to filter surface, odor gas other containing fine particles from the inner surface of the plate and frame filter with active carbon and filtered by another outersurface discharge, after merging into the plate and frame type two stage honeycomb activated carbon filter for efficient filtration, adsorption and depth purification. At this time, tiny particles and dust filter to filter most of the surface, the peculiar smell gas incomplete from the inner surface of the plate and frame filter with active carbon and filtered by another outer surface is discharged to the air outlet. Frame type activated carbon filter treated by two - stage in series, the effective expansion of the gas in contact with activated carbon area at the same time, greatly improves theexhaust gas adsorption and purification effect, and finally a high-voltage electrostatic adsorptiontreatment.Equipment inside a primary filter screen is fixed on the air inlet position of equipment, plate and frame filter adopts the drawer type design, with the access door at the same time, open the can clean, clean or replace the filter. Plate and frame filter is installed in a special frame, a filtering unit is composed of a plurality of activated carbon honeycomb sponge, formed multi-stage purificationunit, and then a plurality of unit assembled into chemical filter section. The metal shell plate and frame filter is made of metal materials, can be repeatedly used, the design can greatly reduce theuser's operating costs.Three、The scope of applicationHave widely used in chemical industry, electronics, metal processing, tobacco, glass,pharmaceutical, food processing, purifying rooms for the production of exhaust gas generated or stainless steel and pipe processing, aluminum and other metal welding lead, tin and other flue gas,exhaust gas or dust or fumes disposal sites.

一、设备介绍   本净化器是一款专为工业废气专业处理车间因生产产生的烟尘及轻质颗粒而设计的一体化净化装置。设备核心部件主要采用活性炭吸附净化装置和静电吸附,既能有效去除废气中的有害物质和污染颗粒等,又能降解各种异味和各种含金属加工厂生产出的有毒有害气体。二、工作原理   设备有进气口和出气口两端。需生产废气经进气口进入中效过滤网板内,烟尘废气中的部分烟尘或颗粒先有过滤网板过滤拦截,而后烟尘废气进入板框式一级蜂窝活性炭过滤器进行初效过滤及吸附。此时,大部分的大颗粒较重的粉尘被过滤至板框过滤器表面,其他含有细微颗粒的异味型气体从板框过滤器的内表面经活性炭层层过滤后由另一外表面排出,汇合后进入板框式二级蜂窝活性炭过滤器进行高效过滤、吸附及深度净化。此时,大部分的微小颗粒及粉尘被过滤至板框过滤器表面,未处理完的异味性气体从板框过滤器的内表面经活性炭层层过滤后由另一外表面排出至出风口。板框式活性炭过滤器采用二级串联处理方式,有效的扩大了废气同活性炭接触面积的同时很大程度的提高了废气吸附及净化效果,再由高压静电吸附进行处理。设备内部的初效过滤网板固定在设备的进风口位置,板框过滤器采用抽屉式设计,同时设有检修门,打开可清理、清洗或更换板框过滤器。板框过滤器安装在特制的框架上,由若干活性炭蜂窝海绵组成一个过滤单元,形成多级净化单元,再由若干单元拼装成化学过滤段。板框过滤器的金属壳体采用金属材质,可以重复使用,这种设计大大降低了用户的运行费用。三、应用范围  广泛应用于化工、电子、金属加工、烟草、玻璃、制药、食品加工、净化室等因生产产生的废气或不锈钢及管道加工、铝等金属焊接时产生的含铅、锡等烟气、废气或粉尘或烟雾处理场所。One、Equipment introductionThe purifier is a specially designed for the professional integration of industrial waste gasprocessing workshop because of dust generated in the production and design of light particles andpurifying device. The core components of equipment mainly uses active carbon purifying deviceand electrostatic adsorption, which can effectively remove harmful substances in exhaust gas andparticulate pollution, but also can degrade various peculiar smell and poisonous and harmful gascontaining various metal processing plant to produce.Two、Working principleThe device has an air inlet and an air outlet ends. Production exhaust gas by the effect of filter screen of the inlet into the inner part of the dust, the dust and waste gas or particle to filter screen filtering to intercept, and then the dust and waste gas into the early effect of filtration and adsorption of plate and frame type level honeycomb activated carbon filter. At this time, most of thebig dust particles heavier by filtering to filter surface, odor gas other containing fine particles from the inner surface of the plate and frame filter with active carbon and filtered by another outersurface discharge, after merging into the plate and frame type two stage honeycomb activated carbon filter for efficient filtration, adsorption and depth purification. At this time, tiny particles and dust filter to filter most of the surface, the peculiar smell gas incomplete from the inner surface of the plate and frame filter with active carbon and filtered by another outer surface is discharged to the air outlet. Frame type activated carbon filter treated by two - stage in series, the effective expansion of the gas in contact with activated carbon area at the same time, greatly improves theexhaust gas adsorption and purification effect, and finally a high-voltage electrostatic adsorptiontreatment.Equipment inside a primary filter screen is fixed on the air inlet position of equipment, plate and frame filter adopts the drawer type design, with the access door at the same time, open the can clean, clean or replace the filter. Plate and frame filter is installed in a special frame, a filtering unit is composed of a plurality of activated carbon honeycomb sponge, formed multi-stage purificationunit, and then a plurality of unit assembled into chemical filter section. The metal shell plate and frame filter is made of metal materials, can be repeatedly used, the design can greatly reduce theuser's operating costs.Three、The scope of applicationHave widely used in chemical industry, electronics, metal processing, tobacco, glass,pharmaceutical, food processing, purifying rooms for the production of exhaust gas generated or stainless steel and pipe processing, aluminum and other metal welding lead, tin and other flue gas,exhaust gas or dust or fumes disposal sites.

产品描述

产品描述

产品描述

产品描述

产品描述

产品描述

您是第 60105 位访客!